Skip to content
Vincony — fast, managed web hosting for your next site
The Pilots Desk
Fightersinterceptor/night fighter

Focke-Wulf Ta 154

Focke-Wulf Ta 154

The Focke-Wulf Ta 154 Moskito was a fast twin-engined night fighter aircraft designed by the German aeronautical engineer Kurt Tank and produced by the aircraft manufacturer Focke-Wulf. It was unofficially named Moskito due to its similarities with the de Havilland Mosquito (which was also largely made of wood) that were already in service with the Royal Air Force (RAF). The Ta 154 commenced development in 1942 and was worked on during much of the latter half of the Second World War. It was designed to replace variants of the Messerschmitt Bf 110 and Junkers Ju 88 and function as a specialised night fighter. As per a stipulation issued by the Reichsluftfahrtministerium (RLM), wood comprised over half of the material needed to build the Ta 154. A special phenolic resin adhesive called Tego film was used to bond sections together. It was originally designated Ta 211 in reference to the intended Jumo 211R engine, although it was subsequently decided to adopt the more powerful Jumo 213 powerplant instead. Following a review of Focke-Wulf's submission, a development contract was issued to the company during late 1942. On 1 July 1943, the prototype Ta 154 V1 performed its maiden flight; it was piloted by Kurt Tank. One of the early prototypes undertook competitive flight testing against both the Heinkel He 219 and the Junkers Ju 388, besting both of these rival aircraft. During March 1944, even though the first eight pre-production aircraft were yet to be completed, the Jägerstab decreed that 37 Ta 154s ought to be completed by May 1944 and that 250 aircraft were to be produced each month by November 1944. This schedule proved highly unrealistic in light of various technical and logistical issues, with key parts (such as engines) not being available in sufficient quantity. Perhaps most crucially, the only factory that produced Tego-Film, in Wuppertal, was bombed by the RAF while replacement bonding agents proved to be inferior and a source of catastrophic mid-flight struc

Summary from Wikipedia, photo via Wikimedia Commons, licensed under CC BY-SA.

Manufacturer
Focke-Wulf
Category
Fighters
First flight
1943-07-01

Specifications

Cruise speed
288 kt
Max speed
350 kt
Range
737 nm
Service ceiling
35,800 ft
Rate of climb
3,000 ft/min
Max takeoff weight
21,054 lb
Empty weight
14,551 lb
Fuel capacity
400 US gal
Powerplant
Junkers Jumo 213E
Engines
2
Seats
2
Length
40.8 ft
Wingspan
52.5 ft
Height
11.5 ft
Number built
28

Specifications are approximate and may vary by variant. Compiled from Wikipedia (CC BY-SA).

Reference and training only. Specifications vary by variant — consult the manufacturer and the official documents.