Riverside Airport
Daylight today(Jul 17, 2026, local time)
About 14h 42m of daylight. Civil twilight (dawn/dusk) approximates the FAA definition of night for logging and currency. Times are computed and approximate — verify with official sources.
About Riverside Airport
Riverside Airport is a small airport in Zanesville, United States. It sits at an elevation of 700 ft (213 m) and has 1 runway, the longest 2,925 ft / 892 m with a hard surface. It observes America/New York local time. The nearest airport is Parr Airport (K42I), about 1.8 nm to the nw.
Summary generated from this airport’s structured data — reference only.
Map
Runway centrelines, navaids and overlapping airspace. Tiles © OpenStreetMap contributors. Reference only — not for navigation.
Runways (1)
| Runway | Length | Width | Surface | Lighting | Status |
|---|---|---|---|---|---|
| 03 / 21 | 2,925 ft / 892 m | 45 ft | Asph | Unlit | Open |
Airspace in this area(1)
| Name | Class | Type | Floor | Ceiling |
|---|---|---|---|---|
| ZANESVILLE CLASS E2 | Class E | Controlled | GND | 17999 ft MSL |
Approximate bounding-box match from OpenAIP · all United States airspace. Reference only — consult official charts for exact boundaries and status.
Nearby airports
Great-circle distance and true bearing from Riverside Airport.
Frequently asked questions
Where is Riverside Airport located?
Riverside Airport is small airport located in Zanesville, United States, at an elevation of 700 ft (213 m).
How many runways does Riverside Airport have?
Riverside Airport has 1 runway, the longest being 2,925 ft / 892 m.
What time zone is Riverside Airport in?
Riverside Airport is in the America/New York time zone (UTC-04:00).
What is the magnetic variation at Riverside Airport?
The magnetic variation (declination) at Riverside Airport is approximately 7.9° W, per the World Magnetic Model. Variation changes slowly over time — always use the current value charted for navigation.
What airports are near Riverside Airport?
The nearest airport to Riverside Airport is Parr Airport (K42I), about 1.8 nm to the nw, followed by Zanesville Municipal Airport and Johns Landing Airport.
Is the information on this page suitable for flight planning?
No. Riverside Airport data here is for reference and training only — not for navigation. Always consult official sources and current charts before any flight.